![Hollis](/img/default-banner.jpg)
- Видео 62
- Просмотров 453 888
Hollis
Добавлен 7 июн 2011
Today, divers are demanding specialized product with higher technical features. Answering this request is Hollis; dive gear designed for leading divers.
Hollis brings innovation and engineering experience to the dive industry by designing the highest quality and most innovative scuba diving equipment available. Equipment designed to accommodate the beginning sport diver to the exploratory technical diver, using the most cutting edge materials and proven technologies for any condition.
Designed and Built with Pride in the USA.
Hollis brings innovation and engineering experience to the dive industry by designing the highest quality and most innovative scuba diving equipment available. Equipment designed to accommodate the beginning sport diver to the exploratory technical diver, using the most cutting edge materials and proven technologies for any condition.
Designed and Built with Pride in the USA.
Видео
Neotek 4/3 Promotional
Просмотров 2,3 тыс.2 года назад
This NeoTek is constructed from a compression-resistant 4/3mm neoprene and a Hollis-exclusive ThermaSkin inner liner. It includes a front neckdam with revolutionary G-lock horizontal front zipper for easy on/off and a tight barrier against water intrusion. Arms and legs are also sealed against leaks with a rolled cuff edge. All seams are double glued and butt-joined with a blind stitch construc...
ST Elite Assembly
Просмотров 8 тыс.2 года назад
Similar to the baseline ST, the ST Elite brings together our most popular single tank components into a single system. However, instead of the solo harness, we added our luxurious and adjustable Elite 2 harness, yielding a result similar to what you’d expect from a full-featured BCD. Here is how to assemble it.
ST Travel Assembly
Просмотров 1,3 тыс.2 года назад
We designed the ST System for minimalist-minded divers who prioritize streamlining their kit, for the ultimate in traditional simplicity. So if you’re concerned about unnecessary bulk and pieces of equipment failing, the ST eliminates those factors. Here is how to assemble it.
Hollis DT50 Wing
Просмотров 1,3 тыс.2 года назад
The DT 50 Wing features a 360 degree tapered profile for heavier cylinders, to increase lift towards the hips, promoting better horizontal trim in dive position while still allowing perfect surface floatation. learn more: www.hollis.com/product/dt50-wing
Hollis ST Wings
Просмотров 2,9 тыс.2 года назад
We designed the ST System for minimalist divers who prioritize streamlining their kit, for the ultimate in traditional simplicity. www.hollis.com/product/st22-wing The ST35 is an excellent go-anywhere wing with the added lift for local cold-water dives but the streamlined design for dive travel. www.hollis.com/product/st35-wing
Hollis ST Systems
Просмотров 3,6 тыс.2 года назад
SIMPLE. RUGGED. MINIMALIST. We designed the ST System for minimalist-minded divers who prioritize streamlining their kit, for the ultimate in traditional simplicity. So if you’re concerned about unnecessary bulk and pieces of equipment failing, the ST eliminates those factors. Learn more at www.hollis.com/product/st-system
Hollis ST Elite System
Просмотров 6 тыс.2 года назад
Hollis Brand Manager, Nick Hollis introduces us to the new ST Elite System. This system gives you that same harness style, but on a backplate for added stability. The ST Elite System also gives you a ton of options to customize depending on your diving style, in case it changes over time.
From the Inside Out - Season 2 Trailer - Hollis Rebreathers
Просмотров 1,9 тыс.4 года назад
Watch Season 1 of From the Inside Out at www.hollisrebreathers.com/from-the-inside-out/
What's Next For Hollis? Live With Brand Manager Nick Hollis and Ambassador Mel Trevino
Просмотров 3964 года назад
To find out about our next live event follow us on Facebook at HollisGear
Katana 2 H-Style Harness Tutorial
Просмотров 8 тыс.4 года назад
Learn more about the Katana 2 at www.hollis.com/sms-katana-2/ The Katana 2 harness sets a new standard in sidemount diving. Designed in collaboration with Edd Sorenson from Cave Adventurers, we developed a unique new "Quick Fit System" which allows users to easily tailor the one-size-fits-all harness to their specific size or adjustment preference in a matter of minutes. We added more lift, mor...
Katana 2 Diving in Utah's Homestead Crater Hot Spring
Просмотров 9 тыс.4 года назад
The Katana 2 harness sets a new standard in sidemount diving. Learn more at www.hollis.com/katana-2/ Designed in collaboration with Edd Sorenson from Cave Adventurers, we developed a unique new "Quick Fit System" which allows users to easily tailor the one-size-fits-all harness to their specific size or adjustment preference in a matter of minutes. Depending on location, everyone’s a little bit...
Hollis - No Limit - Technical Dive Gear
Просмотров 2,1 тыс.4 года назад
Dependable and tough dive equipment for advanced sport divers and for tech divers. Learn more at www.hollis.com/ Hollis engineers superior technical diving equipment. We are intensely focused on providing diving solutions to fulfill our customer’s needs: owning the best technical diving products for their complex diving experiences. This philosophy comes from our founder and industry pioneer Bo...
Teaser! Episode 3 - Manufacturing Process
Просмотров 2545 лет назад
This is the story of the Prism 2: FROM THE INSIDE OUT. For full episodes, visit www.hollisrebreathers.com/from-the-inside-out
Teaser! Episode 5 - Q&A with Instructor Trainer Matthew Addison
Просмотров 1065 лет назад
Teaser! Episode 5 - Q&A with Instructor Trainer Matthew Addison
From the Inside Out - Episode 5 - Q&A with Instructor Trainer Matthew Addison
Просмотров 2,8 тыс.5 лет назад
From the Inside Out - Episode 5 - Q&A with Instructor Trainer Matthew Addison
Teaser! Assembling the Prism 2 Rebreather
Просмотров 5265 лет назад
Teaser! Assembling the Prism 2 Rebreather
Teaser! The Story of the Prism 2: FROM THE INSIDE OUT
Просмотров 2005 лет назад
Teaser! The Story of the Prism 2: FROM THE INSIDE OUT
Kirby Morgan Full Face Mask for Hollis
Просмотров 68 тыс.6 лет назад
Kirby Morgan Full Face Mask for Hollis
Prism 2 USS Oriskany Wreck Dive - The Mighty O
Просмотров 5 тыс.7 лет назад
Prism 2 USS Oriskany Wreck Dive - The Mighty O
Can this BP accept twins / larger bladder?
The backplate can attach to almost all wings but you will need a doubles wing.
Does the Katana 2 black come with both H and Y?
Yes
👍
How about video on attaching LX-1 to system
I like the nose block pincher. I wish the KM hard hats worked that way.
@Hollis - Under the configuration shown in the video, the holes in the waist strap and shoulder strap are more than 11 inches apart. You mentioned setting it up for double with the straps behind. For the waist strap, would it be behind and only through the slats in the rear of the plate that run vertically? That seems like the only way to make it work for doubles.
Is there an option to get the same setup with ST35 wing? I have seen the ST35 comes with steel backplate only.
is there a soft backplate that can be used instead of an aluminum or steel backplate?
Thank you for reaching out, we have a backplate pad that can be added to your setup. www.hollis.com/product/back-plate-back-pad-with-bookscrews/
Looking at this great backplate system. Hollis is always at the top of research (eg Hollis LTS or Katana 2). However, I really dislike those types of weight pockets
Itd be epic with small white or purple highlights
I just bought a Katana 2 style BCD in Y configuration. Where can I buy the Chest Strap shown being added to the BCD with integrated D rings?
Our H-Style Kit is currently out of stock, join our waitlist to be notified when the item is back in stock. www.hollis.com/product/h-style-kit/
👌👌👌
Anything new about the K2 other than the color?
Viene con el backplane y el arnés?
hi,how do i attach weight pockets to the system?
Ordered mine last week. Can't wait to get it in. I'll be posting all about it on my channel and getting lobsters soon.
I just purchased a prism 2, and didn’t get a hat. My retailer store said you are out of them
It's a good mask. The removable pod is great but takes practice. Visibility is not the best
😅 𝚙𝚛𝚘𝚖𝚘𝚜𝚖
Been diving @ 3 years now currently with my tec40 certification. Looking @ a prism2. My LDS swears by it & I trust their knowledge base. Can’t wait to get my Prism2, goal for 2023 🙌🏽🤿💯
how did it turn out for you?
Are dumpable weight pockets available for this system?
Yes, I got them on the standard ST35 which is the same thing as the ST22 shown here but 35 lbs of lift
Just bought this mask. I’ll do a review after a few dives
What is with the long breathing hoses ? Looks like you could remove at least 3 inches per side. I'm assuming the wob needs the extra hose to pass requirements
It looks great and I love that they went with a 4mm BP for 6.5lbs! But I think there advertising is going to piss people off when they order the ST and don’t get the weight bags! All the pictures show it with the bags unlike the ST elite which clearly shows no bags. I’m still picking one up but had to watch this video to confirm it didn’t come with the weight bags.
Hey, can you tell me how the bcd is like? I can hardly find any reviews on it perhaps cause it is new. I've been contemplating between this and the xDeep but thinking of getting the Hollis currently.
Yes please review
@@flatheadfletch Alright first I added the 12lbs weight pockets. I dive in the Pacific Northwest and use a drysuit. The 6 lbs stainless steel backplate helps take that weight off my hips. I love the cutouts in the backplate that act as handles when not wearing it. The back/lower back pads are extremely comfortable. As far as the wing it’s great, it’s simple tough and well designed. On the surface I stay vertical and it doesn’t push me forward. D-rings are standard D-rings and the shoulder ones are integrated into the shoulder pads which I don’t think is a great idea but it works. Another knock is the tank straps I wish they came apart it’s tough getting them on and off the tank especially when they’re wet but other than that I love it! really happy with my purchase and would totally buy it again.
Why would one choose the H vs the Y configuration? Shape of diver or? Who generally prefers which? (I see one of these or an XDeep in my near future so I'm doing lots of research)
I just took a sidemount class with the Katana 2. My instructor recommended H over Y when carrying Steel tanks. Supposed to handle the weight distribution a bit better. Y is better with Aluminum, especially if you have sliding D-rings. H style hardware would interfere with sliding of those D-rings.
@@hotpocketdeath I just did a sidemount class in a Diverite Nomad. Didn't love it. I didn't love the position of the single (?) dump valve or location of inflator hose (left strap as opposed to across the chest).
I did my class in a Nomad it was “ok” but had hard time dumping my air . I am a wider built person H style works for me
Impresionante, si la misma prueba se hace en visibilidad cero sería Cum Laude. 👌👌👌👏👏👏
Looks amazing. Would love to try it - the mouthpiece fit/refit is remarkable. BTW - what are the fins you're using? They look like the later design of ForceFin?
can i use that for welding
Which stand is being used on this one?
Здравствуйте, подскажите пожалуйста какие баллоны в вашем ролике???
And how deep this mask can reach?
Sir how much the price of divator full face mask because I’m interested this...tnx sir for any reply,,,and second where can I buy this mask?
you can use this scuba breathing system during shopping against corona too!
Does the H-style hardware come with it?
It is included
yes
you guys need to create more videos about your gear, like the new Katana 2
This isn't a "Transformers" movie, enough with the over-the-top soundtrack. Just tell us about the product and leave the melodrama to the evening news.
Awesome, I can't wait to watch the series. Thanks again for the incredible experience, and opening my world to rebreather diving!
:)
i'm a vet and i qualified for Voc rehab training , yet i still have not found where to take my rebreather class . anyone can help ? i truly appreciate it . thanks
i love you Hollis people , just terrific
I have a couple of questions about the new Katana 2. How did you attach the canister light to the bc? How would you attach a drysuit inflation bottle under the wing? I dive another brand and got some metal holders and I can attach a small inflation bottled under the wing with bungees. I'm thinking of pulling the trigger on this product.
I would love to dive a rebreather one day.
Let us know if you have every wanted to try a rebreather!
Scott, Houston, Tx... Last dive St. Croix USVI
Looks nice. When can we buy or test the rig in Belgium?
Can’t wait to pick up this system. How about an in-depth video of use?
I felt it's super scary to use this mask because of the music
Music is too dramatic.
I have been diving there, pretty cool to do on a cold day.
Nick... What’s the water temp there?
Have you ever tried Sidemount diving? Let us know below!
Hollis yes SMS75 but now I think to change to Katana2...i 🤔
What wetsuit is the guy using? Not neotek. Something new?